The 104 ShockWave Series
Although your specific vehicle may not be listed, we have a variety of ShockWaves that are designed to work with just about whatever setup you’re using. Whether you’re replacing your current CoilOvers, or starting a fresh build we can suit your air suspension needs.
Independent front and / or Independent rear installations on vehicles weighing 1,200-2,000 lbs. per axle.
NOT recommended for solid axle rear applications ... not enough travel, too much load capacity.
Load capacity: 2,140 lbs. @ 100 psi
|9.35"||10.71"||11.8"||2.6"||Eye / Eye||21120301|
|9.65"||11.01"||11.92"||2.6"||Stud / Eye||21120305|
|10.05"||11.83"||13.02"||3.6"||Eye / Eye||21130301|
|10.35"||12.13"||13.32"||3.6||Stud / Eye||21130305|
|10.75||12.83||14.22||4.1||Eye / Eye||21140301|
|11.05||13.15||14.52||4.1||Stud / Eye||21140305|
Concerning Sleeve Style ShockWaves
A sleeve style airspring or ShockWave typically has a lower load capacity and longer travel than a double convoluted style unit. That is why they are normally used in a rear application. RideTech has now developed a larger 104mm [6.5"] diameter ShockWave that offers the best of both worlds ... the softer linear spring rate of a sleeve style airspring AND the higher load capacity provided by the 104mm diameter. It is EXACTLY the same dimensions as the 6.5" double convoluted style unit but offers an even better ride quality.
You will note that some of the very heavy vehicles such as Cadillacs, Impalas, and trucks may still perform best with the progressive spring rate of the double convoluted style ShockWave. In addition, the 104mm sleeve style ShockWave cannot be run "upside down." For all those applications we still provide the traditional style double convoluted style ShockWaves.
Handling Quality Series
The Handling Quality ("HQ") Series features single adjustable shock valving. It is housed in a impact forged aluminum construction. The HQ series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications.
- Completely redesigned internal design
- Aluminum construction
- Single adjustable shock valving
- Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications
- Impact forged body / mono-tube design for superior ride quality and durability
- Easy & precise valve adjustment with 24 rebound clicks