PDA

View Full Version : Re: wire gauge for digital senders

Keith
02-26-2003, 11:32 AM
On 07/05/02 08:48 AM, Tony wrote:
>
> Our digital gauge comes with a wiring harness.
> The sending unit leads on that are right about
> 20 ft if I remember correctly.
>
> Tony....
Tony, I talked to someone at Ride tech friday, and was told that wire harness did not come with the gauge kit, but was told that I should buy your terminals to connect my wires to the gauge kit. So I ordered those along with 1/8" hose and fittings ($54). I hope I can return the terminals if they are not needed.
Keith
02-26-2003, 11:35 AM
Are you refering to the harness to connect the switches to the solenoid block or the digital gauge to the sending units?
Tony....
Keith
02-26-2003, 11:37 AM
On 07/08/02 10:02 AM, Tony wrote:
>
> Are you refering to the harness to connect the
> switches to the solenoid block or the digital
> gauge to the sending units?
>
> Tony....
After the conversation with Ride-Tech, my understanding was that I still needed all wiring, and hose/ fittings to connect to my manifold. It was explained that the kit contained conectors at the gauge and switches, and 1/8" hose fittings at senders but I would need wire, mating connectors, and 1/8" fittings at manifold to simplfy the instl. no big deal tho, I spent yesterday building the wiring harness consisting of (8) 14# wires to run the valves,(switch to valve) and (4) 18# wires to go from the senders to the digital display. When gauge kit arives, hope to be able to connect assy. at dash and be done.. I will let you know how it goes. Thanks