86 Buick GN

[pimp daddy]

I have an 86 Buick Grand National and ever since I saw the DubCity model I' ve wanted to bag it but noone can tell me if there is a kit for this car. Does anyone know of one?

[B.J.]

The Buick GN/Regal are both a " G" body, so any of our kits that list for the " G" bodies will work. Also, the front suspension on the " G" bodies is the same as the front suspension on the S10s, so you could use the S10 StrongArms if you want to get into some cool tubular arms up front.

[junk runner jr]

keep in mind the s-10 dropped spindles are a bolt on as well. Also better brakes are only as far as your local junk yard. Everytthng from the ball joint out on 98 and up s-10 Blazers is beefier. Bigger rotors and dual piston Callipers.

[pimp daddy]

Thanx guys sorry so long to reply.

[baggedregal]

i have a 87 regal with air ride....your going to love it;)

o and thanks for point out that s-10 shares the same suspension, i knew this but wanted to hear it from someone other than the lil man that lives in side myhead

[baggedregal]

o yes and i wanted to ask. about the lower strong arms from an s-10. how much more diffrent are they than stock? are they shorter? i have a very fast air ride set up and like going low just as much as i like jacking it up to the sky. so i wanted to make sure the lower arms where not going to hurt this

[darren@ridetech.com]

The lower arm is a little longer (not much) to correct the camber. We also adjusted the ball joint angles for a lowered vehicle.

[baggedregal]

i called yesterday and i was told the lower arm wasnt any shorter or longer. but the upper arm was 1/4 longer

[darren@ridetech.com]

I could be wrong but we usually make all changes to the lower arm so the upper can be used with the factory lower. Either way it corrects the camber.