Wanting to lay frame.

[rollinon22s]

I have a 99 Tahoe 2wd 4 door. I will be running 20' s or 22' s. If I go with the airbar in the rear and the coolride in the front will I lay frame? Or do I need to put drop spindles on it first? If not, what do I need to lay frame then?

You will have to run drop spindles BUT be prepared....... If you want to hit the deck in that truck you are going to have to modify the heck out of it. The AirBar will get you down within about 3" of the ground but for what you are wanting to do, i would recommend going with a weld on parallel four link .

Tony....

[rollinon22s]

Thanks for the info, Tony. What would be better for the front the coolride or the shockwave. Does one go lower than the other or are they the same. Thanks, Again

Well if you are wanting to get that low I would opt for the Cool-Ride kit with tubular upper and lower control arms. That will get you more travel and it also corrects the ball joint angles and aids in alignment.

Tony....

[rollinon22s]

Thanks Tony for all of your help. Do you sell the control arms?