lay frame

[slamm3d 91]

would i b able to lay frame in a sonoma if i got the road grater kit in rear and the cool ride kit up front with the big red max kit? i am plannin to used 18s in front with 18s or 20s in rear. if this doesnt work then what would i need to do to make it work?
thanx
matt

[darren@ridetech.com]

No problems there, that is what it was designed for, it will lay out nicely. Good choice on the compressor kit as well. On the rear I would opt for the 20s, you need at least a 28" tall tire to get it up high enough for good ground clearance.

[slamm3d 91]

would i b able to use the stock rims and tires at 1st till i get the extra money to get the wheels or should i just wait till i have the wheels
thanx matt

[darren@ridetech.com]

Pull the specs off you tires to see how tall they are.

[slamm3d 91]

whats ur opinion on the lowest i could goon the hight of the tire? it would only b 4 a couple months till i saved enough 4 the wheels.

[darren@ridetech.com]

Your stock tires might be 27-28 inches tall, if you can get the specs off the tire I can tell you exactly how tall your tire is.

[slamm3d 91]

my tires are p235/55R16 they r xtreme wheels that i got 4 free

[darren@ridetech.com]

Thats right at 26" tall. You would have to be very careful, I would try to get the wheels at the same time. I hear Visa has pretty good rates!!

[S10GreenMachine]

i have 25 inch tires i believe with a xenon body kit on there and i don' t have a problem....although i will be getting 20' s in a few months. but its not that big of a deal, just watch the potholes! lol. the plans you have are my current project right now. actually im done with the roadgrater and im installing the coolride tomorrow.

oh and if you really wanted too....you could probably get a pair of cheap tires that are 28 inches tall and slap em on until you get the new wheels. just a suggestion.

[slamm3d 91]

kool i will look more into that