comprossor ?

[Pimpdaddy]

how do you hook up to comprossors? what would i have to get to do it?

[darren@ridetech.com]

You want to hook up TWO comp. correct??
We normally use a relay. This way you will only need one pressure switch and the will kick on and off at the same time. Which comp. are you running?

[Pimpdaddy]

not sure what the compressor is but it came with the arc4000e

[Takoon]

the common way to hook up a compressor would be to use a relay rated @ about 30 to 40 amps. But you will have to use one relay to a compressor. Run an 8 gauge wire from your comp. and batt to the relay' s w/16 gauge wiring for the pressure switch. or you could run a good solenoid to them.

here' s the relay version I was talking about:
http://www.bagginit.com/images/dual_compressor_pin.gif
and this is the one with the solenoid:
http://lowriderimpala.com/gifs/wiring.gif
hope this helps, good luck.