Yo Darren

[WestCoastImpalas]

Darren, Dave Bauer here.... Is there any plan to make a digital control unit for the Ride Pro E that will allow all corner dump with one button??

[darren@ridetech.com]

That can be accomplished from the remote.

[WestCoastImpalas]

That can be accomplished from the remote.

Why the car is running??

It would be nice to have the control inside the car allow four corner dump with one button while the car is running..

[darren@ridetech.com]

You could put the yellow wire on a toggle, so the ECU thinks the ignition is off.

[WestCoastImpalas]

Darren tell me more about the yellow wire... I can not find my instructions to look at and my car is not at my house.... Yellow wire is wired to ???? And performs what function?? Been almost a year since I installed the ART kit so I have forgot some of the wiring setup.
Dave

[79DeVille]

Yellow wire is connected to your ignition wire, its located on the power harness aloong with the power wire, ground and illuminaton wires. The ignition wire turns on the ECU with the ignition is turned ON. By putting a switch on the yellow wire, it would turn the ECU off while the car is running(ignition on) allowing the remotes to work while driving.
Hopefully you can make sense out of that