Factory adjustments on the ShockWaves

[UncleOtis63]

I' ve looked through the documentation that came with my order and can' t find the answer to this questions.

I' m trying to figure out how to get the shockwaves back to the factory settings on the compression rebound. My front left seems to have a bit more travel than the front right and I want to set them equal. If I turn them all the way right or left will there be a stopping point so that I can count the clicks on both sides? Does this question make sense? By the way, I' m referring to the SKW2023 single adjustable springs.

Sorry for the ignorant question.

Thanks,
Shawn

[darren@ridetech.com]

All the way counter clockwise will be zero. From that point there are 12 clicks clockwise.

[UncleOtis63]

Is all the way counter clockwise more stiff or less stiff? I turned it counter clockwise about 15 clicks but it never stopped. Then I turned it clockwise and sure enough only 12 clicks. I then backed them up 6 clicks each side. I' ll see how the ride is tomorrow.

[SpArX]

All the way clockwise is stiffer, all the way counter-clockwise is softer. That pretty much goes on any shock or rebound adjustment too unless otherwise noted. Kinda like a righty tighty lefty loosey thing! :D