PDA

View Full Version : Bagging my trailblazer


04Trlblzr
03-02-2006, 09:09 PM
I actually have a couple of questions.

How noisey are the compressors? Because I was planning on mounting mine in the cargo area.


As stated before i' m bagging a 2004 trailblazer that already has a 3-4 drop using upper control arms and lowered coils. How low will my ride be after I dump the air from my bags? If its not low enough to my taste what can I do to get it lower?

darren@ridetech.com
03-03-2006, 12:37 PM
The ride height will drop that truck about 3" from the stock height. Fully deflated is about a 6" drop.
The compressors don' t make too much noise. Mount them to a piece of MDF to knock down the vibration.

SpArX
03-03-2006, 03:30 PM
I have my compressor mounted underneath the box of my truck on an aluminum bracket where the bumper used to bolt up. I actually have to listen for it at a stop sign if the music is on, and shut the music off to make sure it' s the actual compressor I' m hearing. I think that' s fairly quiet? Like Darren said though, it' s all in the mount, I could make mine quieter if it was mounted on rubber or mdf surface. But I' m pretty happy with the way mine turned out. I' ll have to see how much more noise the second compressor will be when I add that.