BIG air van

[atwemmt22]

i wanted to put a cool ride in my full size club wagon, which is the ford commercial van. i was wondering if a cool ride and big red would be enough for a full kit, or if i could even install this into my van, and if i could what else would i need.
dave

[darren@ridetech.com]

Dave,
I' ve never installed bags on that van, so you will be on your own with brackets. The BigRed valves will work fine though.
Isn' t that a twin I beam setup on there?

[atwemmt22]

Im not the brightest on suspension, but this is what i know. Its RWD and the suspension is I-shaped, but im not sure if it' s a twin I-beam (I don' t know if those are even different types of suspension). Would an AirBar HD be good for its weight, or does it not go low enough? I would like it to be able to go as low as possible, but i would assume plenty of resstriction for its size.
Dave

[BaggedNeon]

My suggestion would be make your own four link in the back of the van and brackets and just order the bags, valves, and everything else you need from ART.

[atwemmt22]

I' d love to be able to do that, but i dont have nearly enough experiance with my van or any cars to do that...

[darren@ridetech.com]

Dave, tell me what year it is and if its a 3/4 ton or 1 ton. I' ll see what I can dig up.

[atwemmt22]

Darren, its a 3/4 ton ' 94 club wagon.
thanks
dave

[darren@ridetech.com]

I tried checking some part #' s to see if they match the 1/2 ton truck or not. But either way I really doubt that any of our kits will bolt on. You will Probabley have to talk with a fab shop about making some custom brackets.

[atwemmt22]

alright, thanks for the help
dave

[atwemmt22]

which kit would i buy to put the specially made brackets on?
dave

[darren@ridetech.com]

There isn' t one. I' m not even sure what bag to use.

[atwemmt22]

What about an f150/expedition?

[darren@ridetech.com]

We don' t have one for those either.