PDA

View Full Version : New Valves, Problem


NinerAJ
07-06-2006, 02:29 PM
Ok, I just bought and replaced all my valves,
with new GC Extreme 3/8" 250PSI valves.
F.B.S.S. 2 valves per bag, One fill One dump.

On the back tires, everything works fine,
On the front tires, when i try to raise the car, The air dumps straight out the dump valve, and wont raise the car... What am I missing here?

Only thing i could think of was not enough backpressure (5psi) to activate the valve.
So I went and bought an inline adjustable output fitting, and lowered how much air could come out at once. still no luck...

Eagerly watching this thread in hopes someone has the fix

CustomChevS10
07-07-2006, 02:41 PM
is your switchbox wired correctly. If you hit the switch and ur dump valve opens then it seems like it' s a wiring problem. Hit the dump and see if it raises the car. If so then swap the wires.

NinerAJ
07-07-2006, 03:59 PM
It is currently wired through an Auto pilot digital controller, and it is wired correctly, When switching the harnesses from back to front, the front will still not raise

CustomChevS10
07-10-2006, 02:14 PM
any kinks in the air line? can you hear the valve click when you hit the dump or fill??