AirRideR/T
07-30-2006, 02:59 AM
I have 2 ARV2500 valve banks joined up on my system and what is happening is that the valves are not seating! when i air up my tanks the bags all equalize out to my tank pressure,i dump them and the just pop back up to tank pressure in tanks,i need to run my front bags at 90psi and the rear bags at 60psi so truck is level but i cant do that and it is killing my tires,Does any one know if i can add some type of oil or something into tanks to get to the valves so they will seat properly so i can control the pressure?i took the valves apart ounce and cleaned them ,there was some rust on the rubber seats on the valve,so i cleaned them all up and everything worked gret for bout a week then back to this again,so any help or suggestions that have worked would greatly be appreciated,thanks so much ,AirRideR/T