RIDE PRO AND SWITCHES

[MEGA]

WHATS GOING ON FELLAS.

HERE IS MY PROBLEM. I HAVE A RIDE PRO CONTROLLER FLUSH MOUNTED IN THE MIDDLE OF MY DASH IN THE TRUCK, AND IT’S A LITTLE HARD TO PUSH AND HOLD THE BUTTONS IN (WITH MY BIG SAUSAGE FINGERS) WHEN I WANT TO DROP THE TRUCK WHEN I PULL UP TO THE SPOT. SO I WAS WONDERING IF IT WAS POSSIBLE TO ADD SOME SWITCHES IN CONJUNCTION WITH THE RIDE PRO? THAT WAY I JUST HAVE TO HIT THE SWITCHES TO DROP THE RIDE RATHER THEN FIGHT THE RIDE PRO. IF ANYONE HAS AN IDEA ON HOW TO MAKE THIS HAPPEN, PLEASE DON’T BE SHY.

MUCH APPRECIATED

MEGA

[darren@ridetech.com]

You can wire any switch in line between the valves and ECU. Our old rocker switches will work fine.
http://www.ridetech.com/productinfo/components.asp

[MEGA]

Thanks for the reply Darren. Which color wire would i tap into?

[darren@ridetech.com]

There are 8 wires that you will have to tap into. One inflate and one deflate per bag. You can use a test light to identify the wire.