Laying frame in an S-10

[BensS10]

Will I lay frame whith my S-10 if I remove the front fenderwells? Right now the tire sits on the inside of the fenderwell. I have 20" rims front and back and I know the back is capable the front just won' t go low enough.

[SpArX]

Yeah, your truck will lay frame no problem with the liners pulled. It' s quite the task to relocate everything however just to forewarn you. As well you may have to move even more items such as the heater box and what not to lay on 20' s up front! Good luck and enjoy your laid out ride.

[Kustom85BURB]

Yea,20s no prob for me,i just got my ext cab to lay out wiht 22/24 rozzi rims, Im yet to try to put my front fenders back on.

[90_silverado]

i used tto have a s10 on bags and i kept it clean and i did' t cut tha front out with air ride its really jsut for hot rods go with kp components or silver star in horn lake ms or some one better

[CustomChevS10]

used tto have a s10 on bags and i kept it clean and i did' t cut tha front out with air ride its really jsut for hot rods go with kp components or silver star in horn lake ms or some one better while kp is a good company there 6link for the 6 s10 has some problems that need to be worked out. It can all be fixed but that would require more $$...for example the lower link bars should be the same length as the wishbone bar.

as far as the original post. you' ll need to modify your control arms or get tubular ones because stock arms will not lay frame on a 20. Your control arms will lock.

[BensS10]

Ive got the strong arm kit on the front with the tubular control arms...

[darren@ridetech.com]

You might have to trim the upper cup down a bit. I assume you do have drop spindles.