View Full Version : NOTHING BUT PROBLEMS
baggedblazerxtreme
08-05-2006, 04:07 AM
I HAVE HAD NOTHING BUT PROBLEMS WITH MY AIR RIDE. BLEW A BAG WITHIN FIRST WEEK WHEN GOT IT DONE. TOOK IT TO INSTALLER THEY FIXED IT. NOW MY COMPRESSOR ISN' T KICKIN ON I ONLY HAVE 80 LBS IN MY TANK AND CAN' T FILL IT MANUALLY FOR SOME REASON. ALL BAGS ARE LEAKING. HELL THEY HAD MY TRUCK FOR LIKE 3 WEEKS TO GET IT DONE. ANY SUGGESTIONS WITH THE COMPRESSOR DEAL? I KNOW THE GUYS WHO DID IT, THEY HAVE DONE MANY OF VEHICLES AND EVERYONE I TALKED WITH HAS NO PROBLEMS. THEY NEVER DONE MY KIND OF VEHICLE EITHER. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
SpArX
08-05-2006, 05:25 AM
All I can say is that is all in the install.... Maybe they had some new guy learning how to install all on your ride? I would bring it back and tell them to get it right and that they have two days and no more. What system did you have them put in it?
1badPT
08-05-2006, 12:30 PM
I agree with sparx. The problem sounds like the install. Just because a few people had their rides done there with no problems does not make them pros. What was the problem with blowing a bag? Was the bag ruptured becasue of rubbing problems they overlooked? All bags leaking sounds like the air lines weren' t cut square and/or bottomed out all the way into the fittings. The compressor not kicking on; check your fuse? Check your voltage at the compressor with a voltmeter to see if you are getting 12Volts with the key on? Jump the spades on your pressure switch with the key on to make sure the pressure switch isn' t bad...if the compressor does cut on when you jump the spades then your pressure switch needs replacing, but doubt this is your problem.
90_silverado
08-09-2006, 06:56 PM
thats why i like doing all the work my slef from tral and error
CustomChevS10
08-10-2006, 02:56 PM
yep that' s installer error all day. Bags just don' t blow for no reason. Take a look at the bag and see where it was rubbing and you' ll see installer error. As far as the compressor not kicking on have them check your grounds. Also if you take out your compressor and you hook it up directly to the battery and it kicks on then your compressor is fine. If it' s all new then it' s not the parts fault.
CustomChevS10
08-10-2006, 02:56 PM
also check the fuse for the compressor. Perhaps it' s blown.
vBulletin®, Copyright ©2000-2012, Jelsoft Enterprises Ltd.