tell me what i need for an s-10

[Brett]

im a new guy at this, i just got an s-10 and ive been looking over this site for an air ride kit, but i am fairly clueless on what all i need to get to have a complete working kit that will lay frame. btw i plan on using fairly large rims, 20s if they will fit, so tell me what size rims i could have. thanks

[rollinon22s]

For the rear you need to buy the roadgrator. Its all bolt on and will allow you to lay frame with 20s. In the front you might want to go with the coolride. Get the tublar control arms and 2 inch drop spindles and you will lay frame or close to it. You might have to cut out your fender wells in the front. You will have to cut out the bed. As far as which air kit, I would go with the big red max. Thats all you need. Pick up the latest Truckin Magazine they just did this install on a s-10.

[Brett]

thanks, and one more thing, can i install this all myself, if not were is a place in southern california that i can go to get it all done

[rollinon22s]

I' m not sure on what your mechanical skills are, but the roadgrator is made to bolt on so it is some what straight forward. You might have to trim a little off the frame. I' m not really sure in all the steps involved. You might want to ask Darren or Tony they know everything. But if you feel your not up for the task they have a list of dealers on this website that could do it for you.

[Brett]

im sure this is probably a dumb question, but i want my truck to do every movement possible, front, back, side, side and so on, im sure this could be done with a 10 switch box, where do i get one? and is that all i need for this, or are there other components?
thanks, again

[darren@ridetech.com]

Brett,
The control panel we use consists of 4 rocker swithes, just like a window switch. So you can move any direction you want, you' ll just have to hit 2 switches a once which is no big deal. If you wanted though, you could wire in a 10 switch box. I would probably do it in parallel with our switches, then make the box removeable.

[Jo greasey]

You can roll on 20' s if ya wanna, but you will need a complete road grater kit.
Plus your fenders cutout some. Even though people say you cant get no lower than frame, I know better. Cuz I' m the wheel hidin' king.

[darren@ridetech.com]

What do you mean?