Rear shockwaves

[3 UP]

skw9000 rear shockwaves. I have a parallel 4-link and would like to know if I can run my shockwaves on a forward angle on the top. They would be mounted in front of the axle,the reason being is I have very limited space. They would be parallel with the four link.

Thanks for any info,if you can make any sence out of what I wrote.

[darren@ridetech.com]

Shouldn' t be a problem, but with a parallel 4 link you will be a small amount of lateral movement. If minimized it shouldn' t be too much and the bushing should be able to handle it. How much of an angle? What type of vehicle?

[3 UP]

I would say 25-30 degrees foward on the top. It' s a 2dr 2wd tahoe , we all know there is no room for anything under them.:D. It will have a good panhard bar so there shouldn' t be much side to side movement.

[darren@ridetech.com]

Bret has a 96 2dr., that we built a 4 link for. We did CoolRide on it though. I think that I have some pics if you like. email addr.?

[3 UP]

PM sent. Thanks.

[3 UP]

Darren did you get the PM today about the pro e2 ?