Trianulated 4-link chevy-52

[chevy52]

I´m about to build a triangulated 4-link on my chevy 52 and have some questions.

Does the lower and upper bars have to be at the same angle down towards the axle or can they have different angle? The lower straight and the upper leaning uppwards the axle?

Is there any limitations in how long or short the bars must be, can you for example have the upper bars 24" and the lower 12" ?

I´m from sweden by the way if you wonder why i´m writing so badly......;)

[darren@ridetech.com]

Don' t worry, we won' t hold that against you. ;)
It is OK to have the rear of the upper bar slightly higher that the front. This will actually help it hook up a bit.