PDA

View Full Version : I' m New. Can someone help?

Herbykw
08-30-2007, 09:14 PM
im new to air bags. I have a 75 Chrysler Cordoba that i have a bag setup for. I have the bags and brackets but i dont know how to bolt it on. It didnt come with instructions. Does anyone know where i can see some good pics of the installation or diagrams? thank you.




http://i137.photobucket.com/albums/q201/kherby/DSC00170.jpg I do not know how to bolt this piece to my axle. Do i use the large U bolts? And if i do that my bags will not sit flush, they will sit on the bolts. I have no clue how the front will bolt on. I dont have another set of jack stands.

http://i137.photobucket.com/albums/q201/kherby/DSC00171.jpg

http://i137.photobucket.com/albums/q201/kherby/DSC00172.jpg

http://i137.photobucket.com/albums/q201/kherby/DSC00168.jpg I believe this is how it will bolt on
darren@ridetech.com
08-31-2007, 10:51 AM
Looks to me like the lower bracket is designed to be welded to the axle.
Herbykw
09-01-2007, 04:24 PM
I bought it as a bolt on kit, So i hope it does not need to be welded, because i dont know how.
entourageguy
09-02-2007, 09:21 AM
Have you contacted the manufacturer? What brand is it? Where was it bought?
Herbykw
09-02-2007, 03:38 PM
I bought it from Airbagit.com I have requested the information but i have not heard anything back from them.
entourageguy
09-03-2007, 05:35 PM
Also known as AIM I believe ... not good
Herbykw
09-05-2007, 01:32 PM
well crap.... it is the same place.
Herbykw
09-19-2007, 12:46 AM
Those guys are taking forever to respond to anything. I am setting up for someone to weld the rear brackets on, but i still dont know how and where the front brackets hook up. Any pics? diagrams? THank you


http://i137.photobucket.com/albums/q201/kherby/DSC00173.jpg stock front suspension

http://i137.photobucket.com/albums/q201/kherby/DSC00174.jpg another angle

http://i137.photobucket.com/albums/q201/kherby/DSC00172.jpg brackets
darren@ridetech.com
09-19-2007, 12:24 PM
Those brackets are designed to take the place of a Coil spring. However you do not have a coil spring, you have torsion bars. Those brackets will not work with your front suspension. The only thing that I have ever seen work with those front ends is using 7000 series Shockwave in place of the shock and then adjusting the torsion bars down about half way. We use this setup on the 68-70 B bodies and the 70-74 E bodies.