Can we get a LCC to sit lower at the back

[Whitey]

Hi Guys,

I just joined and have read through the forums re 65 Lincoln. I have looked at the photo' s of the rear kit and was wondering can we get the bum down any further by removing another leaf or using bigger blocks?

Any help would be appreciated.

Cheers

[Austlinc]

Any lower than this will require cutting of the trans tunnel under the rear seat.

Cheers Angelo

[darren@ridetech.com]

Yea, I think that pinon snubber mount hits the tunnel.

[Whitey]

Guys,

I have decided to cut the tunnel to fit so I can get right down. Providing I cut what needs to be done how much lower will that shock go in inches?

If there is no more room on that shock can I order a different set to give me the extra travel.

The reason I am persisting is I want mine to look like this

http://www.cardomain.com/ride/2243616

I am ordering the gear through Glen at Airide, so I will pass on the changes to him.

Cheers,

Joel

[darren@ridetech.com]

If you want to go that low I would recommend ditching the leafs completely and going to a 4 link. We offer some universal weld in 4 links that will work. I think that Mobsteel also offers a 4 link for that car.

[Whitey]

Hey guys,

what size are the new rims on the car that you guys developed the system on?

[britt@ridetech.com]

The rims are 20" X 8.5" with 5 1/4" backspacing; the tires are 255/35/20' s all the way ' round.

[Austlinc]

Glen from Airide in Melb?