1991 Cadillac Brougham install

[Cincycaddy]

I' ve got a 1991 Cadillac Brougham (think RWD CAdillac box style-Fleetwood/deville/brougham 4 door the same style from 1980-1992) that I am interested in baggin. I have been told that the rear end shouldn' t be a problem but that the front end will be a bit of trouble because of having to modify the frame to allow for clearence for the air bag. I am jumping back and forth between a hydraulic setup and bag setup but do not want to modify the car a whole lot. Any feedback on a air ride setup for this vehicle would be greatly appreciated. Thanks.
Chris
http://members.cardomain.com/cincycaddy

[darren@ridetech.com]

Chris, Unfortunately we have not had a chance to develope a kit for that car yet. But the bag I would probably use in that car is an F6957. It has an installed height of 5" tall and about 6" in diameter. You will probably be able to keep most of the bag below the frame but you might have to trim a little around the spring pocket.

[Cincycaddy]

ok...so does that mean that the aforementioned bag will allow for 5" s of travel or height adjustment....and what about a rear bag..I' m sure thats not a problem. Secondly is a front shock recommended or necessary? Thanks for the feedback and help....as you can tell I' m new to air---had hydros...been there done that...and if yah peeped my Caddy....you can see why I don' t wanna tear another caddy up with hydraulics.
Chris
http://members.cardomain.com/hoopalac

[darren@ridetech.com]

The rear bag that would probably be used has about 6" of travel, and it is necessary use a shock. We have a universal shock relocation kit for that.