Trailblazer SS Rear Cool Ride

[NORCAL SS]

hey guys my name is tony and run tbssowners.com

us trailblazer ss guys have airbags stock in the back of our trucks and when lowering the trucks ride suffers (im using qa1 coilovers to help)

im looking at your rear cool ride bag set up and myself and many others on my site are interested but need to get some answers

1) What is the extended/collapsed height of the bags
2) do they bolt right in or do you need to weld brackets
3) Us trailblazer ss guys are using the stock airline from the gm factory compressor which is 5/32 line can we make this work on the bags
4) also what is ride height of the bags.

thanks

tony

(ps i used to deal with tony with my s10 ss i was the first to have the air bar from you guys)


Also i run 11.90s on pump gas just seeing if these bags will hold up to street/track racing

www.youtube.com/blowntbss those are some of my vids.

[NORCAL SS]

im having our members do some bag measureing for us.

example

im at 29.5 from ground to fenderlip and bag height is 6 inches from top to bottom. I have the other guys measureing their ground to fenderlip heights from stock and lowered 1 -2.5 inches and telling me their bag measurements. That way i can cross reference it to a bag you guys have that will work. Would be a sleeve set up.

[Tony@AirRide]

Tony....... whats happinin man... Been a while since I have heard from you. Our kit on the rear of a stock trailblazer will bring the ride height down right about 2"-3". It is a direct bolt in kit and can handle the drag racing with no issues and should actually make it more tune-able. In order to get your existing airline to work, you will need to use a 1/4NPTx 5/32 fitting or a 1/4 to 5/32 line conversion fitting. We do not deal with any 5/32 airline here so you will need to source the fitting. :D