1969 Dodge Charger 500

[moparmania]

I recently finished my 1969 Dodge Charger with Air ride tech all four corners . Works great but after a couple of months I lost the Lb display ! Everthing works okay The buttons light up but no readout for the # of lbs . Has this happened to anyone ? Any ideas ?

Pat :eek:

[darren@ridetech.com]

It could be something in the ECU or Control panel, but it's most likely a loose pin in the harness between the two. Take a close look at those two connectors. If that's it give us a call and we'll get it taken care of.

[britt@ridetech.com]

Like Darren said: If it's an E2/LevelPro unit take a look at the harness between the ECU and the display. If the buttons light up and work, but you have no readout the most likely thing is that either the RX or TX wire has become disconnected. (these two wires allow communication between the ECU and the display, if one comes loose it's like a dropped call. Niether knows what the other party is saying.)

[moparmania]

Thanks Ill inspect the harness and pins real close before going any farther

Pat Fletcher

[moparmania]

:):):)Thanks Guys you were exactley right ! The blue wire at the ECU harness end was pulled back away from the pin.
Just took a very small screw driver and clicked it in to position everything works great now .

Pat ...:D

[darren@ridetech.com]

Cool. Any pics of the car? I love Chargers.....