Need Wiring Help...No Instructions...

[TrinityRestoration]

This is another kit someone bought off ebay that didnt come with any instructions. I have everything hooked up and ready to go home but I lack 4 wires! I have done plenty of airride systems but never messed with your airride tech complete systems. It seems older than those on the website, at least the controller does. Anyways, this is what i have!

1-yellow wire

1-green wire

1-red wire

1-black wire


red and black are pretty easy, power and ground. but the green and yellow have me confused. yellow ignition? green? I have no idea?

These wires are coming out of the ECU on the same side as the wiring for the valves. Any help would be great or even a emailed or faxed diagram would be better.

thanks again

Noah Bennett
Restoration Manager

Trinity Restoration
noah.bennett@trinitytulsa.com
918-622-5682-office
918-622-7922-fax

[britt@ridetech.com]

Red=+12v constant
Black=Ground
Yellow=switched +12V (ignition)
Green=Illumination wire (when this wire recieves +12V it will light some LED's behind the buttons in E1, or will dim the display and button backlights in the E2. I rarely use this wire as it poses no harm to leave it unhooked.)
-Britt-

[TrinityRestoration]

thanks for the help, i will start wiring and see what happens.



thanks again
Noah Bennett
Trinity Restoration