PDA

View Full Version : Sleeves,rolling lobe


Ari G
03-11-2008, 11:04 AM
I found a set of sleeved bags for my custom Willys offroad project but lost them

I´m looking for about 10" travel and the car is about 3000-3500lbs 60/40 weight,any recommendations?

This car will be used in the Formula Offroad series,alot of jumps so they have to be strong

I beleve they where Firestone

darren@ridetech.com
03-11-2008, 03:43 PM
We use a lot of the F9000 air springs. They are 4.5" collapsed and 12" extended. They are $95 each. We also have the F9100's which are 5.5" collapsed and 15" extended. They are $195 each.

Make sure that you do not allow these sleeve air spring to overextend, they can be pulled apart.

Ari G
03-11-2008, 11:40 PM
Thanks for the advice Darren

I´m looking for this type of springs

Or can you make customs bags?

http://www.4x4offroads.com/image-files/formula-off-road-akureyri-2006-024.jpg

darren@ridetech.com
03-12-2008, 10:14 AM
Looks similar to the F9000, but taller. You might contact Firestone direct, they manufacturer thousands of different air springs, we only use a handful.