AirOverLeaf

[...MikeMusic...]

If I have 3' ' dropped leaf springs and 4' ' blocks, can I fit the AirOverLeaf in between the frame and spring? If so, how much of a lift can I get out of the rear setup?

[darren@ridetech.com]

You will have to measure it. Measure 6" either in front or behind the axle. The F7076 bag with bracketry needs about 7" between the frame and leaf.

[...MikeMusic...]

Will the bag collapse more than 7' ' once installed? If not, how do people do this with AirOverLeaf?

If my plastic is laying on the ground with 3' ' drop leafs and 4' ' blocks, how far will AirOverLeaf lift my truck?

Thanks for answering these Darren,

Mike

[darren@ridetech.com]

Minimum height is about 3.5" and max. is 9"

[...MikeMusic...]

How come you have to install it a 7' ' then?

[darren@ridetech.com]

Sorry 5-6" . You want to drive with at least 3" of compression and 2" of rebound to get a good ride quality.