Corvette Shockwave dimensions???

[Devilbrad]

Been trying to get some Corvette Shockwave dimensions through tech support online to no avail. I'm putting 96 C4 Corvette front and rear suspension in a 67 Dodge D100 truck and need to find out if the Shockwaves will fit up front. Do they just use the standard ones or are the Corvette ones different? Anyone have some they can measure for me? I need the diameter, extended, and collapsed length. Thanks.

[darren@ridetech.com]

We normally use the SKW1000's front and rear on that suspension. They are 10.66 compressed 13" ride height and 14.75 extended. 6.25" diameter.

http://www.ridetech.com/forum/attachment.php?attachmentid=170&stc=1&d=1219239815

http://www.ridetech.com/forum/attachment.php?attachmentid=171&stc=1&d=1219239815

[Devilbrad]

Cool, thanks! Looks like it might work, gonna have to pocket the frame rails as they are wider than that, but keeping the stock Corvette track width (its like an inch narrower than trucks stock track width.). Time to make some wooden shockwaves and see if they fit. :D