s10 cool ride instructions

[...MikeMusic...]

Is there any way that Ican get the instructions e-mailed to me in an electronic format, such as PDF or text?

[darren@ridetech.com]

No, but there is not much to it. All you have to do is remove the coilspring and shock. Then the bag and bracket kit just falls in place. Check for bag clearance and trim if necessary. Put it all back together and put a jack under the control arm until the bag is about 5.5" tall. This is ride height. Then all you have to do is trim the upper bracket until the shock is 2/3 the way through its travel.
Its pretty simple.

[...MikeMusic...]

What bracket are you talking about trimming, shock or bag?

And what is the p.s.i. for ride height at 5.5' ' ?

[darren@ridetech.com]

Sorry, I am talking about the upper shock bracket. Pressure will be different from one truck to another, usually around 85 psi.