PDA

View Full Version : Level Pro Ride Height Sensors Cables


DTL504
12-04-2008, 11:45 PM
I am installing the Level Pro System on my 84 Z 28 Camaro with Aipod compressor and my front sensor cables is too short, they come to the fuel tank. Do you sell an extension that will allow me to connect to my AirPod. I need 2 - 3ft cables. If you carry these items what is the part #? I could not find anything in your catalog.
Thanks

Another Question:
Your instruction does not say how much clearance is needed for the front Camaro system. I just instruct you to trim the outter edge. How much (width) do I need and how much do these air spring expand?

darren@ridetech.com
12-05-2008, 09:40 AM
If you can get your finger between the air spring and the frame, (with no air in them) through full suspension travel, then you should be fine. They don't exand a whole lot when inflated.

We do not offer any extension cable for the height sensors. We normally just splice in more wire. Just make sure you use heat shrink on the connections.