Newbie with old Coolride system !!

[66wagon]

Just had the luck of scoring a complete coolride system used (ebay) for my 66 chevelle wagon. The kit looks very complete but older. The controls are simply a single gauge with a red and a green needle in a panel with the 4 buttons around it. There is nothing electric other that the wiring for the compessor. I have found the basic bag instructions of your website for the front and rear bags. But nothing for the older controls or how to route and plumb it.Thanks in advance Scott Wacha

[darren@ridetech.com]

So it has four paddle switches that have two air lines plugged into each of them.

[66wagon]

Im not sure how to explain it so ill see if i can add a pic of the front view of the control. ( Not so sure i can do that either ! )

[darren@ridetech.com]

Never seen one of those. I'm guessing it a two way control panel. One button for front inflate, front deflate, rear inflate and rear deflate.

Take a pic of the back side.....we will see if we can figure it out.

Do you have electric valves?

[66wagon]

Wow I guess we find out what happens when I assume! The shocks are dark blue and have air ride technologies decals on them.. just assumed the whole kit came from one place. I think in looking deeper into it i have found the way to plumb the panel. The air lines were cut so it isnt quite as easy as it should be. It has a larger plastic line that supplies air to the panel and from the it branches out to control the front and the rear. Ill take it to where i work and play with it! Thanks