tri link on nissan hardbody

[baggedhb]

hey, new to the forum and i have a ?. i think i am gonna order a tri link from u guys. my ? is. the way the lower link bars mount to the side of the frame, u have them so that the lower bars mount on the outside of the frame. i need mine to weld on the inside because there is not enough room on the outside to start with(i can only tuck a 7" wide rim 7.5" if i wanna push it) so would it be ok if i switched it and put the left mount on the right side and the right mount on the left side. this way i could mount my lower bars on the inside of the framerails too. then everything would be inside the frame rails. or would this cause a problem.

thanks

[darren@ridetech.com]

That would work, just switch brackets from left to right.

[baggedhb]

thanks man, another ? i have is. are the tri links adjustable?
later

[darren@ridetech.com]

Yes. The length of the bars are adjustable.

[baggedhb]

also i have one more ?. it says in the catalog that i got at carlisle that the brackets that weld to the frame for the lower bars are 5" wide, but it doesnt say how tall they are. i am wondering how tall they are because i dont want them to sit lower then my frame so i can lay out completely.
thanks

[darren@ridetech.com]

Actually thats a misprint. They are about 3.5" wide and from the point straight down is about 7" .