1953 Chevy Belair with Mustang II

[djdavec]

Hello,

Finally ready to air ride my '53. Its lowered with 4 inch blocks in the back on the leafsprings. Sitting with a stock Mustang II front suspension, so it sits an inch lower in the back because of the 383 motor I have in it. Want to be able to lay the frame with the bags all the way down. I had the exhaust tucked under and am ready to c notch the frame in the rear it has a 10 bolt Nova. Wanted to get some suggestions on what set up to use??? I just wanted to go front and back? How far up will it sit, with bags all the way up if I set it up to lay the frame? Does anybody have any in the N.C. Raleigh area that does this type of work?

Thanks

[darren@ridetech.com]

How far is your front crossmember off the ground with the lower arm level?

For the rear, to get that low, you are probably going to have to ditch the leaf springs for a 4 link. Prob. triangulated.....
http://www.ridetech.com/catalog/Triangulated_4Link-77-1.html