dimentions

[40buickcoupe]

Where can I find your tank and valve dimentions and ECU Im building my own custom pod and could use these measurements

[george@ridetech.com]

Those dimensions are right on the product pages themselves, this page will have what your looking for: http://www.ridetech.com/store/control-systems/ridepro-e3-digital-4-way-system.html

(you'll have to click on the little thumbnails to bring up a picture, then you can click on the larger thumbnail to see the full size image)

Not sure about the valve dimensions though, will have to look that up.

[40buickcoupe]

I did not see the air compressor either

[britt@ridetech.com]

3-gallon tank:
http://www.ridetech.com/store/suspension-components/components-hardware/compressor-system-components/tanks/air-tank-3-gallon-aluminum-w-2-1-4-ports-and-1-1-8-port.html

5-gallon tank:
http://www.ridetech.com/store/suspension-components/components-hardware/compressor-system-components/tanks/air-tank-5-gallon-aluminum-w-3-3-8-ports-2-1-4-ports-and-1-1-8-port.html

Valves:
The valve dims are not on the website so I'll list them here:
L = 5.5"
W = 2.5"
H = 3.0"
distance between mounting holes (centered in block) = 2.75"

[george@ridetech.com]

The compressor dimensions are on the compressor products:

Thomas 327: http://www.ridetech.com/store/suspension-components/components-hardware/compressor-system-components/compressors/thomas-327-cdc50-12-compressor.html

400C Viair: http://www.ridetech.com/store/suspension-components/components-hardware/compressor-system-components/compressors/400c-viair-compressor.html

(Dimensions: 9.00” L x 4.00” W x 7.00” H)

[40buickcoupe]

thanks
Dennis