e2 display problem

[cm7988]

I installed the e2 system in my 79 elcamino 2 yrs ago, at the end of last summer, the display on the control stopped working. all the buttons light up and the valves all open, but the pressures dont show up on the screen. all my ride height presents are screwed up and compressors will not shut off.

Can it be a bad ecu issue??

the ecu that cam in the kit was defective and one of the compressor circuits
was shorted, it was replaced last spring, hard to believe 2 faulty ecu's, but it only worked fine for a few months

[2blownstangs]

this may sound strange but have you already unplugged everything and plugged them back up to see if they reset at all?

[britt@ridetech.com]

two ECU's that experienced the same issues. . .we need to double check all the wiring in that vehicle.

We are a little busy with the 48 hour Camaro (www.48hourCamaro.com), but you can call the tech line and they can walk you through the wiring.

The failed unit will have to come back for evaluation so I can tell you what happened to it. To do this you will need to talk to tech and get a RMA number.