Is this a Valve problem?

[Bagged93Sierra]

One corner on my airride, the valve is not shutting off, the bag keeps filling up with air. I have to keep letting it out to avoid getting too much pressure in it. I turned my compressor off and drained the tanks till I can figure out what is wrong.
any help would be much appreciated.
Im assuming its something to do with the valves?

[Bagged93Sierra]

Nobody Knows? [&:]

[clynt11]

what type of valves and of switches are you running??

[Bagged93Sierra]

switches.. im using the CON5002 (digital guages and switches)
4 switches.. 1 switch for each corner. Its only 1 corner doing it.
I don' t have the big Red Valves, but im thinking I should upgrade..

[darren@ridetech.com]

Probably just a piece of dirt. Cycle the switch up and down, like a zillion times. 99% of the time it will blow it out. If that doesn' t work disconnect the valve from the system and try blowing shop air backwards through it.

[Bagged93Sierra]

Ok, ill try that.
Sounds easy enough :)

[Bagged93Sierra]

Update: that worked, I took the hose off and blew the valve out.
I never found what was in it. oh well, it works now :D

[darren@ridetech.com]

Good. Thanks for letting us know.