f9000 bags info

[baggedregal]

hey all, i was wanting to know a little about the f9000s.
is it posilble to drill and tap they 1/4 port to 1/2 because there plastic? can i get metal ones? i was told you cant take them past 200 psi or they will blow up or the bag will slip off the clamp...true?
i really want the nice ride of sleves and the exta height, but i dont know what to think about the small ports and low psi.

[darren@ridetech.com]

Nope 1/4" is all they make.
As long as you run a straight fitting you can run up to 1/2" airline without reducing flow. The burst pressure is like 3 or 4 hundred psi. but you must make sure the bag is captured at 12" tall.

[baggedregal]

ok, so i need to make sure that the sleeve stops at 12" . so what should i use to do this? will the shocks that came in the kit stop it? or should i use some straps or air craft cable? and where should it be mounted,maybe have the cable limited on the top and bottom shock mount?

[darren@ridetech.com]

If it is one of our kits the shock should do it.

[baggedregal]

yes, it is a Air ride tech kit with monroe shocks;)