a few questions

[TDogg490]

first, with the ride pro e, if i have a quick setup, how am i sure i wont burst my bags?? is there a pressure switch for the bags that can sut off the valve?? also, with a triangular 4-link in the rear, which would be better: the coolride rear or shockwave?? any information would be great

[darren@ridetech.com]

Bursting pressure on most bags is 300-500 psi. most compressor will only put out 150-200psi. With our setup the compressor has a pressure switch that cuts off at 150psi.

What are you working on?

[Bagged93Sierra]

Yeah, what are you working on?
I have shockwaves on mine and I am pleased, especially with the ride quality. :)

[pestilence]

Darren: If the pressure switch cuts off at 150PSI..what if you hit a bump in the road -- can that be dangerous?


REason im asking is becuase I have some products on order.

[darren@ridetech.com]

I' m confused.

Air bag pressure is totally separate from tank pressure.

[Bagged93Sierra]

Bursting pressure on most bags is 300-500 psi

Pressure in the TANK will only reach 150 psi, but bag pressure might get higher, but.. I doubt by hitting bumps will cause it to get over 300 ever..

[XpRidah]

My buddy hits his truck at 350psi no problem...with a bottle of course. The only time he busts bags is when its regulated at 400+psi.

[TDogg490]

its for an s-10.....i was also wondering if you can do side-to-side with the roadgrater?

[darren@ridetech.com]

Yes, you can go side to side.