Coil-Over Overview

In simple terms, a coil-over is a shock absorber with a threaded body that is surrounded by a coil spring that is held between two collars. This useful design places the shock and coil in one linear unit for compact suspension packaging. Additionally, coil-overs allow for adjustment of spring pre-load which directly impacts your vehicle’s installed height. As such, it is possible to rate your cars static ride height by making changes to to the coil-over’s installed height. For example, if you adjust the collars to compress a coil-over spring, the vehicle will raise up.  Lowering the vehicle’s ride height is simply a matter of loosening the collars.

Shock Features

  1. Monotube design allows large piston for superior oil control, ride quality, and handling.
  2. One piece IMPACT FORGED body allows efficient manufacture and reliable leak-free operation.
  3. 5/8″ hardened shaft is precision ground and straightened to a tolerance of .001″ for increased durability and performance.
  4. Easy access adjuster knob allows a wide range of 26 clicks of rebound adjustment.
  5. Large rubber external bumpstop to prevent harsh bottoming out.
  6. Billet end cap with integrated debris wiper to prevent seal damage.
  7. Oversized rod guide improves piston rod stability.
  8. Integral internal bumpstop eliminates extension crashing.
  9. Hard coat external anodizing ensures years of lasting beauty and performance.
  10. Teflon piston wiper and progressive valving allow consistent piston/bore contact and repeatable performance.
  11. Housing bore is cathode anodized for years of wear resistance.
  12. Specially contoured composite gas separator cup optimizes dead length and ensures proper nitrogen/oil separation.
  13. Long lasting Kevlar lined bearings allow wide articulation and low noise.

Selecting Coil-Overs: Choose HQ Series with single (rebound) adjustment or TQ Series with triple adjustment including rebound, low speed compression and high speed compression.  Before ordering,  measure the distance between mounting points to match the compressed and extended dimensions below.  If you need help determining your vehicle’s coil-over shock length, please call.

Coil-Over Dimensions and Ordering

CompressedRideExtendedHQ SpringTQ SpringHQ SingleTQ Triple
StrokeLengthHeightLengthLengthLengthCoil-Over BodyCoil-Over Body
2.9"8.73"10.5"11.63"8"7"2412990124329901
3.6"9.43"11.5"13.03"8"8"2413990124339901
4.1"10.13"12.5"14.23"10"8"2414990124349901
5.2"11.23"14.5"16.43"12"10"2415990124359901
6.3"12.33"16"18.63"14"12"2416990124369901
6.9"13.13"17.25"20.03"14"14"2417990124379901

Selecting Coil Springs:

To use coil-overs on your vehicle, you must have the correct rate springs installed. The spring rate needs to be within the range of adjustment for your vehicle.

To find your desired spring-rate for the coil spring. Spring rate is the force required to compress a spring 1″ and is an important factor in your ride height. Finding the desired spring rate is a bit tricky, since you will have to know key vehicle parameters such as weight as well as suspension measurements. To help guide you through this process, RideTech has developed a simple spring-rate calculator located HERE.

If you have any hesitation choosing springs, please give us a call directly. RideTech maintains a database of thousands of vehicle weights.  Though we cannot guarantee a perfect match without actual data, we can usually help you choose the correct springs for your application.

RideTech’s 2 1/2″ coil-over springs are built in Indiana by HyperCo. They provide accurate linear spring rate while maintaining ride height throughout its life. Available in dark navy blue and chrome upon request.

Features:
• High Tensile Premium Steel
• CNC Cold Wound
• Lightweight Construction
• Bow Resistant
• Powered Coated Finish Standard

Available Coil-Over Springs. All Springs 
Free Length ID Spring Rate
8″ 2.5″ 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500, 525, 550, 600, 625, 650, 675, 700, 725, 750, 800, 850, 900, 950, 1000, 1100, 1200 lbs/in. To order 8″ springs, click HERE
10″ 2.5″ 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500, 525, 550, 600, 625, 650, 675, 700, 725, 750, 800, 850, 900 lbs/in. To order 10″ springs, click HERE
12″ 2.5″ 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, 450, 475, 500, 550, 600, 650, 700, 750, 800, 850 lbs/in.  To order 12″ springs, click HERE
14″ 2.5″ 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 450, 500, 600  lbs/in.  To order 14″ springs, click HERE
Please call for additional spring rates and options.