ShockWaves :: Universal Styles :: 104 Series - Triple Adjustable ShockWave System - 2.6" Stroke - Stud Mount - RideTech.com - Suspension Specialist

The 104 ShockWave Series

Although your specific vehicle may not be listed, we have a variety of ShockWaves that are designed to work with just about whatever setup you’re using. Whether you’re replacing your current coilovers, or starting a fresh build we can suit your air suspension needs.

Recommended Applications:
Independent front and / or Independent rear installations on vehicles weighing 1200-2000 lbs. per axle.
NOT recommended for solid axle rear applications... not enough travel, too much load capacity.

Load capacity: 2140 lbs. @ 100 psi

Shock Dimensions
Stroke	Compressed Length	Ride Height	Extended Height	Top Mount
2.6	9.7	11.25	12.3	stud

Concerning Sleeve Style ShockWaves

A sleeve style airspring or ShockWave typically has a lower load capacity and longer travel than a double convoluted style unit. That is why they are normally used in a rear application. RideTech has now developed a larger 104mm [6.5"] diameter ShockWave that offers the best of both worlds...the softer linear spring rate of a sleeve style airpsring AND the higher load capacity provided by the 104mm diameter. It is EXACTLY the same dimensions as the 6.5" double convoluted style unit but offers an even better ride quality.

You will note that some of the very heavy vehicles such as Cadillacs, Impalas, and trucks may still perform best with the progressive spring rate of the double convoluted style ShockWave. In addition, the 104mm sleeve style ShockWave cannot be run "upside down". For all those applications we still provide the traditional style double convoluted style ShockWaves.

Our patented solution for a simplified air suspension system - just keeps getting better. The ShockWave® mounts just like a coilover and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, hightech way to provide the ultimate in adjustable suspension design. With more configuration options than ever before, the ShockWave is the premier foundation for a RideTech air suspension system.

The Triple Adjustable Master Series ShockWave

The Master Series features single or triple adjustable shock valving. It is housed in a lightweight Aluminum construction. The Master Series is available in a wide range of stroke lengths, and mounting styles to fit a large variety of applications.

An optional internal ride height sensor is available for this series. This eliminates unsightly external sensors and saves hours of installation time. Its accurate to .005" and has a minimum 10 million cycle life.

Features:

Single rebound adjustment PLUS dual stage high & low speed compression
Aluminum impact forged shock construction for leak free operation
Monotube design allows large piston for superior oil control, ride quality, and handling
Available in a wide range of stroke lengths, and mounting styles to fit large variety of applications
Remote reservoir includes mounting brackets for easy installation