1970-1981 Chevy Camaro,Firebird - Level 2

The LEVEL 2 system provides more tuning with the addition of a ShockWave® front kit and the enhanced RideProe3™ control system.The front ShockWave® system is a simple bolt-on install that includes our STRONGARM™ tubular control arms. The single shock and air spring unit provides a cleaner appearance and offers adjustable shock valving to aid in tuning. A 4-Link AirBAR® will position the rear more precisely and eliminatethe flexing and instability of the leafspring rear. The 5 gallon RidePro® e3 compressor system provides 4 way digital control. It allows 3 system air pressure presets to provide accurate adjustments with the touch of just one button.

Features:

with strong arm upgrade

The ShockWave® mounts much like a coilover and replaces both the coil spring and the shock absorber. The Shockwave kit bolts in using the existing upper shock mount. (Note: some trimming of your spring pocket may be required)

The Shockwave system will lower the vehicle from the factory ride height and provides the ability to go even lower when not being driven by lowering the air pressure further.

1. Unequalled ride quality
2. Proven patented sealing technology
3. Anodized billet aluminum construction
4. Eliminates tire clearance problems

To optimize suspension, our ShockWave system requires the replacement of the factory lower arm with our StrongArm lower control arm which is included in this system.

Handling Quality

Shock Series

Shocks are the heart of every suspension system and are the key component in provide ride control to the driver. The Level 2 system includes the upgrade to our Handling Quality Series, single adjustable aluminum shocks, both front and rear.

The HQ shock has an impact forged aluminum body / mono-tube design with adjustable valving. Adjustability Provides More Options for Desired Driving Style and Loads Easy and precise valve adjustment with 26 rebound clicks from soft to firm

(upper and lower included in this package)

StrongArm tubular control arms not only improve suspension geometry and handling, they also make installation even easier. The added benefit when replacing control arms is new bushings and ball joints. No more worn out components.

Optimized ball joint angle... to ensure no binding during extreme suspension travel Black powdercoated... for lasting appearance and protection Installed Cross shafts & Ball Joints.. for simple installation .219" wall DOM tubing... for lasting strength and reliability Shock mounts swaybar mounts, steering stops are built in... no fabrication needed

Proper airspring or ShockWave® placement... component mounts are designed in, not an afterthought Proper ball joint selection... we use a compression ball joint in a compression application and a tension ball joint in a tension application (just like the factory engineered it) to prevent failures Optimized arm length... makes proper wheel alignment a breeze Jig welded... every part is built right, every time

The Bolt-on 4-link from Ridetech, formally known as the Airbar, is a 4-link rear suspension that will directly bolt into the oem leafspring mounts of your prized musclecar... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2". The ride quality and performance is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.

1. The Ridetech 4-Link system lowers vehicle ride height and provides the ability to go even lower when not being driven by lowering the air pressure further.
2. Pre-engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities
3. Bolt-on installation (no fabrication required)
4. Greatly improved handling performance
5. Ultimate ride quality.

Handling Quality Shock Series

Shocks are the heart of every suspension system and are the key component in provide ride control to the driver. The Level 2 system includes the upgrade to our Handling Quality Series, single adjustable aluminum shocks, both front and rear. The HQ shock has an impact forged aluminum body / mono-tube design with adjustable valving. Adjustability Provides More Options for Desired Driving Style and Loads Easy and precise valve adjustment with 26 rebound clicks from soft to firm

We have equipped this package with our ridePro E3 compressor system outfitted with a high capacity compressor and a 5 gallon tank.

The RidePro e3 System Features: