1970-1981 Chevy Camaro,Firebird - Level 3

This is our "Street Challenge" system and it includes the best of every option we have to offer. If you are looking for the most versatile, and best performing system, then this is the option you should consider. Upgrades like StrongArms, MuscleBars, and the AirPOD control system are nearly always included in the Level 3 system.

Features:

with strong arm upgrade

The ShockWave® mounts much like a coilover and replaces both the coil spring and the shock absorber. The Shockwave kit bolts in using the existing upper shock mount. (Note: some trimming of your spring pocket may be required)

The Shockwave system lower the vehicle from the factory ride height and provides the ability to go even lower when not being driven by lowering the air pressure further.

1. Unequalled ride quality
2. Proven patented sealing technology
3. Anodized billet aluminum construction
4. Eliminates tire clearance problems

To optimize the suspension, our ShockWave® system requires the replacement of the factory lower arm with our StrongArm lower control arm which is included in this system.

Track Quality

Shock Series

Shocks are the heart of every suspension system and are the key component in provide ride control to the driver. The Level 3 system includes the upgrade to our Track Quality Series, triple adjustable aluminum shocks, both front and rear.

The TQ shock has an impact forged aluminum body / mono-tube design with adjustable valving. Adjustability provides more options for desired driving style which includes single rebound adjustment PLUS dual stage high and low speed compression.

(upper and lower included in this package)

StrongArm tubular control arms not only improve suspension geometry and handling, they also make installation even easier. The added benefit when replacing control arms is new bushings and ball joints. No more worn out components.

Optimized ball joint angle... to ensure no binding during extreme suspension travel Black powdercoated... for lasting appearance and protection Installed Cross shafts & Ball Joints.. for simple installation .219" wall DOM tubing... for lasting strength and reliability Shock mounts swaybar mounts, steering stops are built in... no fabrication needed

Proper airspring or ShockWave® placement... component mounts are designed in, not an afterthought Proper ball joint selection... we use a compression ball joint in a compression application and a tension ball joint in a tension application (just like the factory engineered it) to prevent failures Optimized arm length... makes proper wheel alignment a breeze Jig welded... every part is built right, every time

The most overlooked suspension component is also one of the most important. The magic you could be missing in your suspension may be nothing more than simply adding or upgrading your swaybar. The new Musclebar sway bars were developed specifically for lowered vehicles and will greatly enhance the cornering performance of your vehicle ( Not to mention they'll also make some vehicles safer at the speeds we travel on today's interstate highways.

"Ball Joint" style connection allows bind free operation through a extremely wide range of motion.
- 360º rotation
- 45º misalignment
Durable design will outlast traditional bushing style connectors

Billet Tie Rod Adjusters - Strong, easy to adjust and look cool too. Large wrench flats on both ends provide an easy way to dial your suspension anodized aluminum finish provides long lasting good looks.

The Bolt-on 4-link from Ridetech, formally known as the Airbar, is a 4-link rear suspension that will directly bolt into the oem leafspring mounts of your prized musclecar... no cutting, no fabrication, just 4 small tabs to weld to the axle for your upper bars. The ride height of your car is typically lowered by approximately 2". The ride quality and performance is dramatically improved over stock... instead of a wallowing soft ride you’ll experience a crisp, controlled ride quality that will inspire more confidence for performance driving.

1. The Ridetech 4-Link system lowers vehicle ride height and provides the ability to go even lower when not being driven by lowering the air pressure further.
2. Pre-engineered mounting hardware to maintain ground clearance, driveline angles, tire clearance and load capacities
3. Bolt-on installation (no fabrication required)
4. Greatly improved handling performance
5. Ultimate ride quality.

Track Quality Shock Series

Shocks are the heart of every suspension system and are the key component in provide ride control to the driver. The Level 3 system includes the upgrade to our Track Quality Series, triple adjustable aluminum shocks, both front and rear. The TQ shock has an impact forged aluminum body / mono-tube design with adjustable valving. Adjustability provides more options for desired driving style which includes single rebound adjustment PLUS dual stage high and low speed compression.

We have equipped our Level 3 package with our Airpod e3 compressor system outfitted with a high capacity compressor, 5 gallon tank, and level sensors for increased accuracy.

The Airpod e3 system features: