RideTech continues to offer today's hot rodders the ultimate in ride quality, handling performance, technical support, and now, SIMPLICITY, with the new coilover suspension components.

• Anodized finish protects against corrosion
  
  
• Available as fixed valve or rebound single adjustable
  
  
• CNC machined billet hardware
  
  
• Unique pinch clamp height adjuster uses finer thread for easy adjustment
  
  
• Includes 1/2" bore x 1" kevlar lined bearings for noise free operation
  
  

RideTech 2 1/2" coil over springs

built in Indiana by HyperCo:

High tensile premium steel CNC cold wound, less weight, more resistant to bowing, increased travel with durable powered coated finish

• Monotube gas pressure design offers superior fade free performance
  
  
• Impact forged aluminum body provides superior strength and reliable service
  
  
• Larger 1.834" piston provides outstanding ride quality
  
  
• Double sealed rod guide with dust cover eliminates oil leakage
  
  
• 5/8" chrome shock shaft
  
  

RideTech Aluminum MonoTube Shocks

Great Performance

Mono-tube construction sets this coil-over shock apart - it means consistent performance and great ride quality

Coil Springs come in a variety of spring rates ranging from 125 to 800 lbs/in
Coilover Springs Priced at: $75
Shop for springs below
*All Coilover shocks come with spring mounts

Two Ways to Shop Coil-Overs:

By Vehicle Application:

1967-1969
Camaro

1970-1981
Camaro

1964-1967
A-Body

1968-1972
A-Body

1955-1957
Chevy

1958
Impala

1959-1964
Impala

1965-1970
Impala

1964-1966
Mustang

1967-1970
Mustang

1962-1967
Nova

1968-1974
Nova

1978-1988
G-Body

Mopar
B-Body

Mopar
E-Body

By Universal Coil Shock Options:

Non-Adjustable Coil-Over

The non-adjustabile coil-over retains the same build quality of the other shock-lines and is dialed to the best ride quality possible.

Single-Adjustable Coil-Over

The single-adjustabile coil-over allows the driver to tune and adjust the shock performance and/or ride quality at the turn of a knob located on the shock body.

Select Coil-Over

The RideTech Select series is a steel body monotube damper with TWO sets of independent internal valving so you can choose between "cruise-mode" with a soft compliant ride or a firmer "sport mode" for handling performance... all at the touch of a switch... without having to get under your car.

Stroke	Compressed	Extended	Suggested Spring Length	Price
2.9"	8.725"	11.625"	8"	$475	[Purchase]
3.6	9.425	13.025	8	$475	[Purchase]
4.1	10.125	14.225	10	$475	[Purchase]
5.2	11.225	16.425	12	$475	[Purchase]
6.3	12.325	18.625	14	$475	[Purchase]
6.9	13.125	20.025	14	$475	[Purchase]
	Select Series Controller The Select Series Controller is required to control the shock valving of the select series product line. One controller can control up to 4 shocks simultaneously.			$100	[Purchase]
	Additional Control Switch Adding an additional control switch to the Select Series Controller will allow the driver to change valving of the front and rear shocks separately.			$25	[Purchase]

Triple-Adjustable Coil-Over

The triple-adjustabile coilover has a single rebound adjustment and a DUAL stage [high speed and low speed] compression adjustment. It uses a remote reservoir that is connected with a 30" braided line for easy installation in a variety of installation applications.

Coil-Over Accessories:

Spanner Wrench

$20.00 - Part No. 85000000 - Purchase

If you own a pair of RideTech coilovers, you will want these. The spanner wrench is used to adjust or tighten the ridetech coil retainer on the coilover which allows you to adjust the preload of the coil spring.

Dropped Spring Retainer Cup

$25.00 - Part No. 90002070 - Purchase

The dropped spring retainer cup will lower the spring position 3/4" lower from the top coil-over mount. In certain applications this will help clearance issues on the upper mount.