Announcement

Collapse
No announcement yet.

Re: wire gauge for digital senders

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: wire gauge for digital senders

    On 07/05/02 08:48 AM, Tony wrote:
    >
    > Our digital gauge comes with a wiring harness.
    > The sending unit leads on that are right about
    > 20 ft if I remember correctly.
    >
    > Tony....
    Tony, I talked to someone at Ride tech friday, and was told that wire harness did not come with the gauge kit, but was told that I should buy your terminals to connect my wires to the gauge kit. So I ordered those along with 1/8" hose and fittings ($54). I hope I can return the terminals if they are not needed.


  • #2
    RE: Re: wire gauge for digital senders

    Are you refering to the harness to connect the switches to the solenoid block or the digital gauge to the sending units?
    Tony....

    Comment


    • #3
      RE: Re: wire gauge for digital senders

      On 07/08/02 10:02 AM, Tony wrote:
      >
      > Are you refering to the harness to connect the
      > switches to the solenoid block or the digital
      > gauge to the sending units?
      >
      > Tony....
      After the conversation with Ride-Tech, my understanding was that I still needed all wiring, and hose/ fittings to connect to my manifold. It was explained that the kit contained conectors at the gauge and switches, and 1/8" hose fittings at senders but I would need wire, mating connectors, and 1/8" fittings at manifold to simplfy the instl. no big deal tho, I spent yesterday building the wiring harness consisting of (8) 14# wires to run the valves,(switch to valve) and (4) 18# wires to go from the senders to the digital display. When gauge kit arives, hope to be able to connect assy. at dash and be done.. I will let you know how it goes. Thanks

      Comment

      Working...
      X