Ridetech Home Forums Tech & Products bag size on roadgrater

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #175716
    shawn rhodenshawn rhoden

    i am wondering what size ports are on the bags for the road grater system, because i am going to be running 1/2 slam specialty bags in the ront and want 1/2/ inch for the rear. is it possible to run 1/2 inch lines with the roadgrater. any help would be appriciated.

    #181420
    darren@ridetech.comdarren@ridetech.com

    RE: bag size on roadgrater

    The Roadgrater setup uses the F9000 bag with has a 1/4 npt port size. I have a
    1/4npt x 1/2 tube straight fitting that has the same size orifice as 1/2″ airline.
    Therfore, it will not reduce flow.

    #181429
    shawn rhodenshawn rhoden

    RE: bag size on roadgrater

    will i be able to use half inch valves on this kit

    #181433
    darren@ridetech.comdarren@ridetech.com

    RE: bag size on roadgrater

    That would probably be a little overkill considering the bag port size.

    Also we don’ t have 1/2″ valves, 3/8″ is our biggest (Big Red).
    On the S-10 in our ads we have the Roadgrater setup with 4-way Big Reds w/ 1/2″ air lines and rise time is under 1 sec..

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.