Ridetech Home Forums Tech & Products Questions on Baggin a 2000 S-10 Blazer

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #175715
    smullensmullen

    I have a 2000 S-10 Blazer 2 Dr 2WD, right now its dropeed 5/5 via Belltech parts and sittin on 20×8.5s…

    I want to bag it soon and am currently buying all the parts as I can.

    I am looking for some type of 4 link, but don’ t see anything for Blazers…

    What would be the best way to do the rear?

    I want to go as low as possible and have plenty of lift as be able to do F/B/S/S.
    I’ m not really worried about hopping.

    Thanks in Advance

    http://www.teamxratedstl.com

    #181421
    darren@ridetech.comdarren@ridetech.com

    RE: Questions on Baggin a 2000 S-10 Blazer

    I don’ t have any bolt-on 4 links for the Blazer, but the triangulated 4 link works great. The install is not too complicated but you might have to relocate the gas tank.
    As far a going fbss that will be done with compressor kit. I would use either the 4way Ride Pro or Big Red system.

    #181427
    syclnjrsyclnjr

    RE: Questions on Baggin a 2000 S-10 Blazer

    Just to give you some advise Darren is correct as we all know that he would be about the triangulated it works great for the Blazer but i have had some buddies run into the problem with the pumpkin hitting the body if your sitting pretty low. Just food for thought

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.