Ridetech Home Forums Tech & Products S-10 Cool ride

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #175713
    syclnjrsyclnjr

    Hey guys question for you about the cool ride front kit. Do you have any pics of it done on an s-10 with a 2 inch dropped spindle. I would like to see how low it goes. I talked with Trent at the Detroit Autorama and he said that it would lay frame. I would just like to see some pics of it if that is possible. Or will I have to buy the kit put it on and drive down to Jasper to show you guys how low it can go;). Thanks guys keep up the killer work.

    #181424
    darren@ridetech.comdarren@ridetech.com

    RE: S-10 Cool ride

    There are a couple pic on this site. Go to the homepage and click on new stuff or technical info. Also try browsing the customer cars. Any lowered S-10 should have drop spindles on it..

    #181426
    syclnjrsyclnjr

    RE: S-10 Cool ride

    Ok I will do that I just wanted to make sure that they were using the new cool ride kit and not the kit with the Shockwaves. Thanks

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.