48 Hour Camaro in Popular Hot Rodding
Wednesday, September 14th, 2011

  If you pick up the November Issue of Popular Hot Rodding you may notice something interesting in butternut yellow on the cover page, something that was built in only 48 hours. If you haven’t guessed already the 48 Hour …

Product Detail Video – Inside look at Lingenfelter Performance Engineering
Wednesday, September 14th, 2011

Jason Haines of Lingenfelter Performance Engineering shows us around their facility and explains just a few of the things they do to make their engine packages some of the best in the world.

Product Detail Video – Gear Vendors Under/Overdrive
Wednesday, September 14th, 2011

Rick Johnson of Gear Vendors shares all the advantages of their overdrive unit installed in the 48 Hour Camaro. From the drop dead simple installation to the benefits of close ration shifting.

48 Hour Camaro in Musclecar Power
Tuesday, August 9th, 2011

Back in May when we built the 48 Hour Camaro, present at the build was Travis Novak of Musclecar Power magazine. Travis stayed with us for the entire project, taking pictures and documenting the project. Well just recently his work …

48 Hour Camaro – Summer Update
Tuesday, July 26th, 2011

Its been a busy summer already for RideTech… the 48 Hour Camaro build…the release of the new Triple Adjustable coilover…the debut of the new Tru Turn steering system that was developed on the 48 Hour Camaro…lots to keep up with! …

Product Detail – RideTech Rear Suspension
Thursday, June 30th, 2011

Check out the AirBar set-up going in the 48 Hour Camaro – only this one isn’t being built with air suspension, but using the new triple adjustable CoilOver shocks from RideTech.

Product Detail Video – Vintage Air A/C System
Thursday, June 30th, 2011

The 1967 Camaro used for the 48 Hour Build wasn’t equipped from the factory with AC. That didn’t stop us from getting the best air conditioning system available! The Vintage Air Gen 4 system made the install of the condenser, …

Product Detail Video – Ididit Steering Column
Thursday, June 30th, 2011

You can’t build a pro level car and keep the old worn sloppy steering column. That is why Ididit was such an important part of the 48 Hour Camaro. Take a look at what sets this column apart and how …

Product Detail Video – Forgeline Wheels
Thursday, June 30th, 2011

Dave from Forgeline explains how the 48 Hour Camaro’s 10″ front and 12″ Rear wheels can work, and how you can figure out what size backspace, frontspace, offset, and size you need as well as highlights the advantages of the …

Product Detail Video – Vintage Air Front Runner
Thursday, June 30th, 2011

Solid, dependable, compact, and attractive… we’re talking about Vintage Air’s Front Runner for the LS engine. This system makes quick work of mounting all the needed components (alternator, ac compressor, water pump, power steering pump) to your LS engine.