1967 – 1969 Camaro Firebird / 1968 – 1974 Nova | Front Lower StrongArms – Stock Style Coil Spring

$775.00

  • Tubular control arms add strength, style and improved performance
  • Self-lubricating Delrin bushings reduce deflection and suspension bind 
  • Increased caster dramatically improves handling and control
  • Adjustable ride height to fine tune the stance
  • Compatible with stock style coil springs or Ridetech dual rate springs

California Prop 65 Warning 

Description
Ridetech’s performance tubular control arms outperform stamped OEM stock control arms through precision engineering, significant geometry updates and use of stronger / high tech materials.
Using precision CNC bent tubing for superior accuracy and fixture welded to exacting tolerances, the Ridetech StrongArms bolt directly in the factory location with included new hardware for a quick and easy install. 
 
Revisions to geometry offer significant improvement in dynamic caster and camber curves to provide dramatic improvements in handling and control by making best use of modern performance tires. 
 
Our new stock coil spring StrongArms provide an adjustable ride height to fine tune the stance by adding or removing the included spacers beneath the coil-spring. This typically allows fine tuning of the ride height by just over an inch to account for weight variances, as well as a wide range of tire and wheel combinations. 
 
Compatible with stock style coil spring or Ridetech dual rate springs
 
Development   –    StrongArms™ are developed by Ridetech® in Jasper, Indiana on an actual running, driving vehicle. This allows us to properly address ALL fitment and performance issues. It also allows us to document an installation, demonstrate the installation to our sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms™
 
Design   –    We think the best way to design any component is to keep it simple. That is why Strong Arms™ are designed with as few components as possible.  They are manufactured in house on our 4 axis tubing bender that allows precise, repeatable bends that no other machine can achieve. We can create elegant tubing bends that would otherwise require several separate welded components.  The perimeter of the StrongArm is contoured to allow maximum wheel clearance and turning radius.  
 
Components   –    Powder coated in a satin black finish and completely assembled with ball joints and bushings.  To reduce deflection and stiction from the suspension movement Injection Molded Delrin Bushings are used, which are also impregnated with Teflon to eliminate the need for lubrication.   
 
Geometry   –    Properly designed control arms will add more positive caster (without a pile of shims) and will position the wheel in the wheel opening for maximum clearance.   Ball joint angles are repositioned to prevent binding. 
 
Adjustability   –    Stance is everything.  To acquire the stance YOU WANT we lowered the spring pocket and include spring shims allowing you to fine tune the stance from 1″ drop to stock ride height. 
 
Additional information
Suspension Type

StreetGrip – Stock Upgrade

StrongArm Spring Style

Stock Style Spring

Vehicle Fitment
Make Model Year
BUICK APOLLO 1973 - 1974
CHEVROLET CAMARO 1967 - 1969
CHEVROLET CHEVY II 1968
CHEVROLET NOVA 1969 - 1974
OLDSMOBILE OMEGA 1973 - 1974
PONTIAC ACADIAN 1968 - 1971
PONTIAC FIREBIRD 1967 - 1969
PONTIAC VENTURA 1971 - 1974
Reviews

1967 – 1969 Camaro Firebird / 1968 – 1974 Nova | Front Lower StrongArms – Stock Style Coil Spring

$775.00

  • Tubular control arms add strength, style and improved performance
  • Self-lubricating Delrin bushings reduce deflection and suspension bind 
  • Increased caster dramatically improves handling and control
  • Adjustable ride height to fine tune the stance
  • Compatible with stock style coil springs or Ridetech dual rate springs

California Prop 65 Warning 

Description
Ridetech’s performance tubular control arms outperform stamped OEM stock control arms through precision engineering, significant geometry updates and use of stronger / high tech materials.
Using precision CNC bent tubing for superior accuracy and fixture welded to exacting tolerances, the Ridetech StrongArms bolt directly in the factory location with included new hardware for a quick and easy install. 
 
Revisions to geometry offer significant improvement in dynamic caster and camber curves to provide dramatic improvements in handling and control by making best use of modern performance tires. 
 
Our new stock coil spring StrongArms provide an adjustable ride height to fine tune the stance by adding or removing the included spacers beneath the coil-spring. This typically allows fine tuning of the ride height by just over an inch to account for weight variances, as well as a wide range of tire and wheel combinations. 
 
Compatible with stock style coil spring or Ridetech dual rate springs
 
Development   –    StrongArms™ are developed by Ridetech® in Jasper, Indiana on an actual running, driving vehicle. This allows us to properly address ALL fitment and performance issues. It also allows us to document an installation, demonstrate the installation to our sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms™
 
Design   –    We think the best way to design any component is to keep it simple. That is why Strong Arms™ are designed with as few components as possible.  They are manufactured in house on our 4 axis tubing bender that allows precise, repeatable bends that no other machine can achieve. We can create elegant tubing bends that would otherwise require several separate welded components.  The perimeter of the StrongArm is contoured to allow maximum wheel clearance and turning radius.  
 
Components   –    Powder coated in a satin black finish and completely assembled with ball joints and bushings.  To reduce deflection and stiction from the suspension movement Injection Molded Delrin Bushings are used, which are also impregnated with Teflon to eliminate the need for lubrication.   
 
Geometry   –    Properly designed control arms will add more positive caster (without a pile of shims) and will position the wheel in the wheel opening for maximum clearance.   Ball joint angles are repositioned to prevent binding. 
 
Adjustability   –    Stance is everything.  To acquire the stance YOU WANT we lowered the spring pocket and include spring shims allowing you to fine tune the stance from 1″ drop to stock ride height. 
 
Additional information
Suspension Type

StreetGrip – Stock Upgrade

StrongArm Spring Style

Stock Style Spring

Vehicle Fitment
Reviews

1967 – 1969 Camaro Firebird / 1968 – 1974 Nova | Front Lower StrongArms – Stock Style Coil Spring

$775.00

  • Tubular control arms add strength, style and improved performance
  • Self-lubricating Delrin bushings reduce deflection and suspension bind 
  • Increased caster dramatically improves handling and control
  • Adjustable ride height to fine tune the stance
  • Compatible with stock style coil springs or Ridetech dual rate springs

California Prop 65 Warning 

Description
Ridetech’s performance tubular control arms outperform stamped OEM stock control arms through precision engineering, significant geometry updates and use of stronger / high tech materials.
Using precision CNC bent tubing for superior accuracy and fixture welded to exacting tolerances, the Ridetech StrongArms bolt directly in the factory location with included new hardware for a quick and easy install. 
 
Revisions to geometry offer significant improvement in dynamic caster and camber curves to provide dramatic improvements in handling and control by making best use of modern performance tires. 
 
Our new stock coil spring StrongArms provide an adjustable ride height to fine tune the stance by adding or removing the included spacers beneath the coil-spring. This typically allows fine tuning of the ride height by just over an inch to account for weight variances, as well as a wide range of tire and wheel combinations. 
 
Compatible with stock style coil spring or Ridetech dual rate springs
 
Development   –    StrongArms™ are developed by Ridetech® in Jasper, Indiana on an actual running, driving vehicle. This allows us to properly address ALL fitment and performance issues. It also allows us to document an installation, demonstrate the installation to our sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms™
 
Design   –    We think the best way to design any component is to keep it simple. That is why Strong Arms™ are designed with as few components as possible.  They are manufactured in house on our 4 axis tubing bender that allows precise, repeatable bends that no other machine can achieve. We can create elegant tubing bends that would otherwise require several separate welded components.  The perimeter of the StrongArm is contoured to allow maximum wheel clearance and turning radius.  
 
Components   –    Powder coated in a satin black finish and completely assembled with ball joints and bushings.  To reduce deflection and stiction from the suspension movement Injection Molded Delrin Bushings are used, which are also impregnated with Teflon to eliminate the need for lubrication.   
 
Geometry   –    Properly designed control arms will add more positive caster (without a pile of shims) and will position the wheel in the wheel opening for maximum clearance.   Ball joint angles are repositioned to prevent binding. 
 
Adjustability   –    Stance is everything.  To acquire the stance YOU WANT we lowered the spring pocket and include spring shims allowing you to fine tune the stance from 1″ drop to stock ride height. 
 
Additional information
Suspension Type

StreetGrip – Stock Upgrade

StrongArm Spring Style

Stock Style Spring

Vehicle Fitment
Reviews