1.7″ Tall Eye Mount for Shockwave/CoilOver

$50.00

 California Prop 65 Warning

SKU: 90002074 Category:
Description

* Sold Individually

All eyelets include bearing and spacers kit.  Fits all HQ and TQ Series CoilOvers and Shockwaves (2″ diameter threaded body)  

All shock end treatments must have Loctite 712 prep and Loctite 262 threadlocker or equivalent applied to clean dry threads according to label instructions.  The shock shaft can be held using Irwin ViceGrip Model 7LW.  CLAMP SHAFT NEAR THREADED PORTION ONLY!!!.  Improper clamping of any portion of the shaft can result in seal failure.  The end treatment must then be torqued to 35-40 ft/lbs.  Caution: over torqueing will result in poor adjuster function.  It is recommended all end treatments be installed by Ridetech or a certified Ridetech dealer.

Additional information
Weight1 lbs
Dimensions2 × 2 × 2 in
Shock Style

,

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “1.7″ Tall Eye Mount for Shockwave/CoilOver”

1.7″ Tall Eye Mount for Shockwave/CoilOver

$50.00

 California Prop 65 Warning

SKU: 90002074 Category:
Description

* Sold Individually

All eyelets include bearing and spacers kit.  Fits all HQ and TQ Series CoilOvers and Shockwaves (2″ diameter threaded body)  

All shock end treatments must have Loctite 712 prep and Loctite 262 threadlocker or equivalent applied to clean dry threads according to label instructions.  The shock shaft can be held using Irwin ViceGrip Model 7LW.  CLAMP SHAFT NEAR THREADED PORTION ONLY!!!.  Improper clamping of any portion of the shaft can result in seal failure.  The end treatment must then be torqued to 35-40 ft/lbs.  Caution: over torqueing will result in poor adjuster function.  It is recommended all end treatments be installed by Ridetech or a certified Ridetech dealer.

Additional information
Weight1 lbs
Dimensions2 × 2 × 2 in
Shock Style

,

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “1.7″ Tall Eye Mount for Shockwave/CoilOver”

1.7″ Tall Eye Mount for Shockwave/CoilOver

$50.00

 California Prop 65 Warning

SKU: 90002074 Category:
Description

* Sold Individually

All eyelets include bearing and spacers kit.  Fits all HQ and TQ Series CoilOvers and Shockwaves (2″ diameter threaded body)  

All shock end treatments must have Loctite 712 prep and Loctite 262 threadlocker or equivalent applied to clean dry threads according to label instructions.  The shock shaft can be held using Irwin ViceGrip Model 7LW.  CLAMP SHAFT NEAR THREADED PORTION ONLY!!!.  Improper clamping of any portion of the shaft can result in seal failure.  The end treatment must then be torqued to 35-40 ft/lbs.  Caution: over torqueing will result in poor adjuster function.  It is recommended all end treatments be installed by Ridetech or a certified Ridetech dealer.

Additional information
Weight1 lbs
Dimensions2 × 2 × 2 in
Shock Style

,

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “1.7″ Tall Eye Mount for Shockwave/CoilOver”

Hazardous Material Warning

 This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Hazardous Material Warning

 This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.