CoilOver System for 1968-1979 Corvette

From: $6,875.00

CoilOver System for 68-79 Corvette. Includes front and rear HQ Series CoilOvers, front TruTurn, rear StrongArms and front MuscleBar.

Clear

 California Prop 65 Warning

Description

The RideTech CoilOver System for the 1968-1979 Corvette includes everything you need to make your vintage C3 Corvette handle like a new Corvette.  The package contains front upper and lower control arms, tall spindles, billet steering arms, inner & outer tie rods, front MuscleBar, rear trailing arms and 4 HQ Series CoilOvers for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle’s performance and ride quality.

  • Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.    
  • Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.   
  • TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering.  It also include billet aluminum steering arms, center link adapter, tie rods and adjusters to virtually eliminate bumpsteer, correct Ackerman angle and allow for wider tires.   This spindle is designed for use with 1967-1969 Camaro brake systems.   Use Coversion kit part # 11529595 to utilize stock Corvette brakes.   
  • HQ Series CoilOvers utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.  Interested in AutoCross or Road Course Racing?  Consider the TQ Series CoilOvers.  
  • Front MucleBar Sway Bar is a splined design and helps reduce body roll and creates room for wider front tires. It includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. 
  • Rear StrongArms are offset for increased tire clearance and are fabricated into a truss design for maximium strength and minimum weight.  They feature R-Joint rod ends at the front mounting point to reduce stiction and roll bind. Also incorporated is the adjustable coilover mount, conveniently locating them behind the axle for easy adjustments.   The upper coilover crossmember simply bolts in place of the stock cross member.   The strut rods are outfitting with R-Joint rod ends to combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!

UPGRADES

  • TQ Series Shocks- The remote reservoir triple adjustable coil-over shocks feature rebound adjustment along with dual stage (High Speed & Low Speed) compression adjustment.   High speed adjustment allows tuning for impact harshness and low speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course and drag strip.  Read More
  • Rear MuscleBar Sway Bar- The addition of the rear swaybar is for the true track car. Wide tires + Big horsepower typically means faster corner speeds. The MuscleBAr Swaybar helps keep those rear tires hooked up through the corner.  
Videos

Instructions

11530201_WEB.pdf

Single Adjustable Coil-Over Kit Instructions

11530301_WEB.pdf

Tripe Adjustable Coil-Over Kit Instructions

19-shock-tuning-guide.pdf

Adjustable Shock Tuning Guide

CoilOver_Instructions.pdf

Assembly Instructions

TQ_Intake_Sheet.pdf

TQ Intake Sheet

Additional information
Weight149 lbs
Dimensions2 × 2 × 2 in
Add Rear MuscleBar

,

Shock Series

,

Suspension location

Suspension type

Year

, , , , , , , , , , ,

Make

Model

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CoilOver System for 1968-1979 Corvette”

Vehicle Fitment
Make Model Year
CHEVROLET CORVETTE 1968 - 1979

CoilOver System for 1968-1979 Corvette

From: $6,875.00

CoilOver System for 68-79 Corvette. Includes front and rear HQ Series CoilOvers, front TruTurn, rear StrongArms and front MuscleBar.

Clear

 California Prop 65 Warning

Description

The RideTech CoilOver System for the 1968-1979 Corvette includes everything you need to make your vintage C3 Corvette handle like a new Corvette.  The package contains front upper and lower control arms, tall spindles, billet steering arms, inner & outer tie rods, front MuscleBar, rear trailing arms and 4 HQ Series CoilOvers for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle’s performance and ride quality.

  • Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.    
  • Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.   
  • TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering.  It also include billet aluminum steering arms, center link adapter, tie rods and adjusters to virtually eliminate bumpsteer, correct Ackerman angle and allow for wider tires.   This spindle is designed for use with 1967-1969 Camaro brake systems.   Use Coversion kit part # 11529595 to utilize stock Corvette brakes.   
  • HQ Series CoilOvers utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.  Interested in AutoCross or Road Course Racing?  Consider the TQ Series CoilOvers.  
  • Front MucleBar Sway Bar is a splined design and helps reduce body roll and creates room for wider front tires. It includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. 
  • Rear StrongArms are offset for increased tire clearance and are fabricated into a truss design for maximium strength and minimum weight.  They feature R-Joint rod ends at the front mounting point to reduce stiction and roll bind. Also incorporated is the adjustable coilover mount, conveniently locating them behind the axle for easy adjustments.   The upper coilover crossmember simply bolts in place of the stock cross member.   The strut rods are outfitting with R-Joint rod ends to combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!

UPGRADES

  • TQ Series Shocks- The remote reservoir triple adjustable coil-over shocks feature rebound adjustment along with dual stage (High Speed & Low Speed) compression adjustment.   High speed adjustment allows tuning for impact harshness and low speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course and drag strip.  Read More
  • Rear MuscleBar Sway Bar- The addition of the rear swaybar is for the true track car. Wide tires + Big horsepower typically means faster corner speeds. The MuscleBAr Swaybar helps keep those rear tires hooked up through the corner.  
Videos

Instructions

11530201_WEB.pdf

Single Adjustable Coil-Over Kit Instructions

11530301_WEB.pdf

Tripe Adjustable Coil-Over Kit Instructions

19-shock-tuning-guide.pdf

Adjustable Shock Tuning Guide

CoilOver_Instructions.pdf

Assembly Instructions

TQ_Intake_Sheet.pdf

TQ Intake Sheet

Additional information
Weight149 lbs
Dimensions2 × 2 × 2 in
Add Rear MuscleBar

,

Shock Series

,

Suspension location

Suspension type

Year

, , , , , , , , , , ,

Make

Model

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CoilOver System for 1968-1979 Corvette”

Vehicle Fitment

CoilOver System for 1968-1979 Corvette

From: $6,875.00

CoilOver System for 68-79 Corvette. Includes front and rear HQ Series CoilOvers, front TruTurn, rear StrongArms and front MuscleBar.

Clear

 California Prop 65 Warning

Description

The RideTech CoilOver System for the 1968-1979 Corvette includes everything you need to make your vintage C3 Corvette handle like a new Corvette.  The package contains front upper and lower control arms, tall spindles, billet steering arms, inner & outer tie rods, front MuscleBar, rear trailing arms and 4 HQ Series CoilOvers for every corner of your vehicle. The benefit of buying a complete suspension system is that it takes all of the guesswork out when purchasing a new suspension. RideTech has spent hours collecting data to find a perfect spring rate and components for your vehicle’s performance and ride quality.

  • Upper StrongArms feature corrected ball joint angles for the tall spindles. The upper ball joint have been moved back to allow for additional caster setting to improve high speed stability and steering feel. Offset slugs are also available for additional caster. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.    
  • Lower StrongArms feature a double sheer lower mount for increased strength. We have also dropped the lower shock mount to increase suspension travel and moved the lower ball joint forward to increase caster settings while keeping the wheel centered in the wheel opening. Injection molded Delrin bushings with 13% Teflon are used to reduce deflection and stiction.   
  • TruTurn System includes tall spindles which induce more negative camber gain to maximize tire contact patch during cornering.  It also include billet aluminum steering arms, center link adapter, tie rods and adjusters to virtually eliminate bumpsteer, correct Ackerman angle and allow for wider tires.   This spindle is designed for use with 1967-1969 Camaro brake systems.   Use Coversion kit part # 11529595 to utilize stock Corvette brakes.   
  • HQ Series CoilOvers utilize an impact forged aluminum body and Monotube design to deliver excellent ride quality and handling. They allow fine tuning of the ride quality and handling the rebound knob is located at the top of the shock for under hood access. They come standard with a 1,000,0001 Mile Warranty.  Interested in AutoCross or Road Course Racing?  Consider the TQ Series CoilOvers.  
  • Front MucleBar Sway Bar is a splined design and helps reduce body roll and creates room for wider front tires. It includes the PosiLink endlinks that provide immediate engagement between the chassis and control arms. 
  • Rear StrongArms are offset for increased tire clearance and are fabricated into a truss design for maximium strength and minimum weight.  They feature R-Joint rod ends at the front mounting point to reduce stiction and roll bind. Also incorporated is the adjustable coilover mount, conveniently locating them behind the axle for easy adjustments.   The upper coilover crossmember simply bolts in place of the stock cross member.   The strut rods are outfitting with R-Joint rod ends to combine the best qualities of low friction movement, lateral stability, full range articulation, and quiet operation into one special bearing that is as home on the street as it is on the racetrack!

UPGRADES

  • TQ Series Shocks- The remote reservoir triple adjustable coil-over shocks feature rebound adjustment along with dual stage (High Speed & Low Speed) compression adjustment.   High speed adjustment allows tuning for impact harshness and low speed adjustment allows tuning of cornering characteristics, perfect for use on the autocross, road course and drag strip.  Read More
  • Rear MuscleBar Sway Bar- The addition of the rear swaybar is for the true track car. Wide tires + Big horsepower typically means faster corner speeds. The MuscleBAr Swaybar helps keep those rear tires hooked up through the corner.  
Videos

Instructions

11530201_WEB.pdf

Single Adjustable Coil-Over Kit Instructions

11530301_WEB.pdf

Tripe Adjustable Coil-Over Kit Instructions

19-shock-tuning-guide.pdf

Adjustable Shock Tuning Guide

CoilOver_Instructions.pdf

Assembly Instructions

TQ_Intake_Sheet.pdf

TQ Intake Sheet

Additional information
Weight149 lbs
Dimensions2 × 2 × 2 in
Add Rear MuscleBar

,

Shock Series

,

Suspension location

Suspension type

Year

, , , , , , , , , , ,

Make

Model

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “CoilOver System for 1968-1979 Corvette”

Vehicle Fitment

Hazardous Material Warning

 This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.

Hazardous Material Warning

 This product can expose you to chemicals including Nickel Acetate, Chromium, Lead, Lead Compounds, Nickel (Metallic), Nickel Compounds, Diisonyl Phthalate (DINP) and Toluene which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.